Los Angeles, CA – based powered loudspeaker manufacturer BASSBOSS releases the SV9 single 9″ Powered Monitor, a deeply satisfying mix of studio quality audio clarity, surprisingly deep low frequencies, very high output, wide dispersion, and long-throw. This attractive and durable monitor is equally at home in a wide variety of settings where quality audio is imperative.

The SV9 is a studio-reference quality monitor with capabilities that extend beyond the limits of the recording setting. It can venture outside the studio environment with a rugged finish, convenient handles, grilles and a substantial amount of power. For small groups, the 90º dispersion and extended throw allow audiences to experience the music deeply, even with comfortable distancing.

In practical terms, the SV9 is a very compact and portable system for those who need premium quality and impressive output. The crowds can’t be big, but the experiences can be that much more memorable and precious when the sound is as intimate as the event.

This single 9″ loudspeaker compares to much larger loudspeakers in response and output.
Such performance from a very small enclosure is made possible by making decidedly different design and component choices than standard monitor design.

The Birch plywood enclosure is strong and solid, and easily portable. The 9″ woofer features a large voice coil and a rubber surround for high power handling and smooth response. The 1200 W RMS amplifier offers abundant headroom and the proprietary BASSBOSS processing ensures exceptional sound quality and reliability. The 18mm Baltic birch cabinet construction, elegant design, and premium components all contribute to rich, smooth sound for any room or occasion.

The SV9 provides extremely flat frequency response with a neutral character for critical monitoring duties and, thanks to lots of power, it delivers remarkably high output for its size. With an enclosure of only 18″” x 10″″ x 15″″, it can fit nearly anywhere, and at just 26 pounds, it’s easy to move. One SV9 can be carried in either hand, so smaller events can be loaded in and out with ease.


The amplifier is a 1200W Class D SMPS with PFC, offering 2-channels: 800W LF and 400W HF. The SV9s all-new DSP offers tremendous processing power and the ability to run proprietary algorithms. Multiple presets allow for a variety of configurations.

The custom developed 9″ Neodymium LF driver provides larger displacement and higher sensitivity. The 2.5″ voice-coil offers greater power handling and higher output, and the single-roll rubber surround provides a very smooth frequency response.

The SV9 uses an annular diaphragm ring-radiator Neodymium HF driver. Its lighter diaphragm results in lower distortion and extended HF response. The Neodymium motors provide increased sensitivity with less weight.

Performance Specifications:

Frequency response (+-3dB):     Preset 1: 50Hz – 19kHz
Preset 2: 65Hz – 19kHz
Preset 3: 80Hz – 19kHz
Preset 4: 100Hz – 19kHz

Maximum continuous SPL:        118dB

Peak SPL:                                121dB

Loudspeaker Description:         Wide dispersion compact full-range self-powered loudspeaker with additional presets for                                                        satellite mode operation

Frequency Response (±3 dB):   50 – 19,000 Hz (full range)

Maximum Sustained Output:    118dB SPL, 1m, 2pi, half-space

Max SPL (Peak)* Nominal:        121 dB

Dispersion (H° x V°):               90 x 60 (Rotatable)

Amplification:                         1200 W – two channel Class D Amplifier with PFC (90-250V)

Processing:                             Integrated comprehensive DSP provides high pass, low pass, equalization, phase alignment and                                               limiting

Enclosure Type:                     2-way full-range/mid-high. Direct radiating vented LF section, horn-loaded HF section

Transducer Low Frequency:   1 x 9 in. diameter (220 mm) neodymium motor woofers with 2.5 in. (64mm) copper winding                                                    voice coil.

Transducer High Frequency:  1.5 in. (38mm) diaphragm compression driver on 1 in. throat 90 x 60 degree horn

Cabinet Construction:          15 mm Baltic Birch plywood. Equipped with 2 handles. Includes a 35mm steel pole socket

Dimensions (HxWxD):           18in. x 10 in. (7 in. rear) x 15 in.

Net Weight:                         26 lbs

Shipping Weight:                 31 lbs

BASSBOSS® Powered Loudspeakers provide next-level, proprietary protection processing, allowing extended high-power operation. Optimized cabinet design, premium quality drivers, power-matched amplification and comprehensive DSP ensure that no matter the demand, they keep their cool, keep their character and keep on working.

Learn more:
www.bassboss.com/sv9

For further information, contact:
Judit Serral Soler
855-822.7770
marketing@bassboss.com

www.bassboss.com